TMC Mitsubishi TD04L Phase 1 Hybrid TURBO ONLY for Abarth 500 / 595 / 695, Punto Evo Abarth, Grande Punto Abarth

SKU: TD04L-PHASE1

Includes TD04L professionally balanced with red coloured lightened Ergal compressor wheel impeller with a 0.6 Bar Actuator.

Please note this is the TD04L TURBO ONLY.

PLEASE VISIT OUR TMC POWER PACKAGES HERE TO SEE OUR TURBO CONVERSION KITS.

PLEASE CONTACT US FOR ADVISE ON YOUR CAR IF NEEDED.

PLEASE ALSO NOTE YOU WILL REQUIRE A DIFFERENT DOWNPIPE FOR THIS TURBO WHICH CAN BE PURCHASED SEPERATELY ON OUR WEBSHOP HERE.

• Professionally balanced Genuine Mitsubishi TD04L turbo unit
• Red hard-anodised 7075 aluminium (Ergal) compressor impeller. 
• 860°C bearing capacity with 920°C peak.
• 7075 aluminium (Ergal) water line blanking cap.

Information below from Saito (The Manfacturer of This Turbo):

The current 1.4 Fiat engine is fascinating, powerful and reliable in line with Fiat’s quality which for many years has developed and produced small and medium-sized petrol engines capable of delivering thrilling power in sport versions. SAITO interest for tuning has been born since the turbo engines 1.4 was installed on the Fiat Uno and Punto GT which led our company to provide specific tuning kits according to the intended use. There are tuning kits designed to achieve high torque with very respectable engine power and other tuning kits designed to achieve power higher even than 60% nominal values. The decision to provide specific kits according to different needs was born to suit those who used their cars on track rather than for slalom races or hill climb races. In these disciplines the engine must have a very different torque and power supply. Following success in SP170 and SP190 tuning kits for the “old” 1.4 engine, SAITO has decided to develop a TD04 / TD04L turbocharger in the form of a COMPLETE KITS to meet fans and professional installers.

The power achieved at a pressure of about 1.1 Bar is 235 hp with a torque output of about 25 Kgm to over 310. Obviously the control unit needs to be remapped. It is possible to set up the engine to reach a power of 260 hp with a boost pressure of about 1.7 Bar but it is necessary to arrange important engine modifications such as molded pistons, ring head gasket, and increased injectors. TD04L-PHASE 1 is a TD04 / TD04L turbocharger oil cooled equipped with a HiSi turbine housing (good resistance to temperatures with a maximum bearing capacity of around 860° with a peak of 920°) and with pneumatic pressure regulator in direct connection with the compressor in order not to use the air pressure regulator connected to the control unit. It is a simple solution that can reduce set-up issues.

SAITO supplies the TD04L-PHASE1 Scorpio Kit with 1.1 bar waste gate actuator. This type of strong actuator provides direct pressure control between the compressor and the actuator without use the duty cycle valve called Pierburg which has to remain electronically connected. In case you would handle the pressure through the duty cycle electric valve (Pierburg), you need to set-up a low pressure actuator (0.6 bar) that can be ordered with the tuning kit at a slightly higher price.

The UP TO 260 BHP TMC TD04L HYBRID TURBO CONVERSION KIT FOR ABARTH 500 / 595 / 695 kit has no rivals, it is the cheapest and most performing tuning kit available on today’s market and it is easy to install. You only need to change the remapping of the control unit but it is always suggested to refer to a professional installer. SAITO provides the most famous Italian and international car tuners with high quality products and tuning kits made with Mitsubishi TD04L / TD04 turbochargers, according to the highest standards and materials specifically designed for racing – we do not use Chinese products!

We would like to make it clear that our turbos are supplied and modified by Saito Italy who are the only officially authorised European Mitsubishi turbo distributor, meaning that the turbo chargers we supply are guaranteed to be genuine Mitsubishi parts.

We would like to draw people’s attention to cheap copy turbochargers, made in China, being offered by several suppliers - these are not genuine Mitsubishi turbos, they are low quality copies and are known to fail easily.

Our advice is to please check the supply chain that you buy from as cheap often means low quality, and saving some money on the purchase can cost much more in the end if you have to strip the engine down to replace the turbo. Remember, if it's too good to be true - it usually is.